Meter and Plug Panels
Contura Switch Waterproof Fuse Panels
- Will withstand the water exposures normally encountered in above deck applications: salt spray, rain, hose washdowns, momentary immersions
- ON-OFF Contura Switches
- ON indicating LEDs embedded in switches
SPECIFICATIONS
Fuse Holder Rating 20 Amperes maximum (15 Ampere fuses included)
Maximum Voltage Rating 24 Volts
DC
Voltage 12 or 24 Volts DC
Switch Rating 20 Amperes@12 Volts DC, 15 Amperes@24 Volts DC
Panel Cumulative Rating 45 Amperes
- Will withstand the water exposures normally encountered in above deck applications: salt spray,rain, hose washdowns, momentary immersions.
- ON-OFF Contura Switches
- ON indicating LEDs embedded in switches
- Watertight mounting gasket included
- Countersunk mounting holes throughout
- Heavy 1/8"aluminum material
- Two-part polyurethane slate gray finish
- Industry standard height and width
- Mil-Spec chemical treatment via immersion to protect every surface detail from corrosion
- Completely wired and ready to install
- Includes set of common DC labels
- Over 500 labels available
NOTE: Waterproof panel labels are not backlit
| Specifications | |||||
| PN | Description | Width(mm) | Height(mm) | Weight(Kg) | |
| 3 Position | 8054 | Vertical | 133.35 | 95.25 | 0.32 |
| 4 Position | 8262 | Horizontal | 133.35 | 95.25 | 0.34 |
| 6 Position | 8053 | Vertical | 133.35 | 190.50 | 0.54 |
| 8 Position | 8261 | Horizontal | 238 | 95.25 | 0.64 |
| Contura Switch Waterproof Fuse Panels | |||
| BSS8054 | W/Proof 3 Vert Switchs | $101.30 |  |
| BSS8262 | W/Proof 4 Horz Switch | $126.07 | |
| BSS8053 | Waterproof 6 Verticle | $163.89 | |
| BSS8261 | Waterproof 8 Horizonta | $211.54 | |
Contura Waterproof Circuit Breaker Panels
Designed for flybridge and open cockpit applications- Panel front is rated IP66—Protected against powerful water jets
- Ignition protected—safe for installation aboard gasoline powered boats
- ON-OFF Contura SwitchesON indicating LEDs embedded in switch
- Watertight mounting gasket
- Push Button Reset-Only circuit breakers with waterproof boots
- ON indicating LEDs embedded in switch
- Watertight mounting gasket
- Push Button Reset-Only circuit breakers with waterproof boots
- Meets UL 1500 and ISO 8846 ignition protection requirements
- Countersunk mounting holes throughout
- Heavy 1/8"aluminum material
- Two-part polyurethane white or black finish
- MIL-C-5541C immersion undercoating for lifetime corrosion resistance
- Completely wired and ready to install
- Includes set of 60 common DC labels
- NOTE: Waterproof panel labels are not backlit
SPECIFICATIONS
Maximum Voltage 24 Volts DC
Circuit Breaker Rating 15 Amperes
Panel Cumulative Rating 45 Amperes
Fuse Holder Rating 20 Amperes maximum
Switch LED Amperage Draw 18 Milliamperes each
Switch Rating 20 Amperes@12 Volts DC, 15 Amperes@24 Volts DC
| Specifications | |||||
| Colour | PN | Description | Width(mm) | Height(mm) | Weight(Kg) |
| White | 8274 | 3 Position - Vertical | 114.30 | 95.25 | 0.34 |
| White | 8272 | 4 Position - Horizontal | 133.35 | 107.95 | 0.41 |
| White | 8273 | 6 Position - Vertical | 114.30 | 190.50 | 0.61 |
| White | 8271 | 8 Position - Horizontal | 238 | 107.95 | 0.79 |
| Black | 8374 | 3 Position - Vertical | 114.30 | 95.25 | 0.34 |
| Black | 8372 | 4 Position - Horizontal | 133.35 | 107.95 | 0.41 |
| Black | 8373 | 6 Position - Vertical | 114.30 | 190.50 | 0.61 |
| Black | 8371 | 8 Position - Horizontal | 238 | 107.95 | 0.79 |
| Contura Waterproof Circuit Breaker Panels | |||
| BSS8274 | Panel WP 3 Pos White | $119.15 | |
| BSS8272 | Panel WP 4 Pos White | $143.75 | |
| BSS8273 | Panel WP 6 Pos White | $190.85 | |
| BSS8271 | Panel WP 8 Pos White | $245.80 | |
| BSS8374 | Panel WP 3 Pos Black V | $119.15 | |
| BSS8372 | Panel WP 4 Pos Black H | $143.75 | |
| BSS8373 | Panel WP 6 Pos Black V | $190.83 | |
| BSS8371 | Panel WP 8 Pos Black H | $245.85 | |
ARRID Volt & Amp Panels
Thinking about adding some volt meters/Ammeters into your system, well look no further than these stylish panel meter mounts. Made out of a strong 2.5mm alloy laser cut plate to fit 2 ARRID meter panels, either horizontally, or vertically. This only requires one large hole to be cut in the desired position, rather than 5 holes per meter. These panels therefore drastically reduce the time and headaches of installing the meters.
Features:
- Laser cut 2.5mm alloy panel
- Panels can be used either vertically or horizontally
- Best suited to ARRID range of meters including:
- 10-16V
- 0-10A
- 0-15A
- -10-0-10A
- Small Meter Panels is 74 x 148 x 2.5mm
- Large Meter Panel is 90 x 180 x 2.5mm
4WD Rear Plug Outlet Panels
GU - Nissan Patrol
Features:
- Clips directly into rear panel
- Designed for access panel replacement
- No drilling required
- Laser cut 2.5mm alloy panel
- ARRID expanded scale voltmeter or ammeter
- Carling push button circuit breakers
- 2 x ARRID 16 A sockets
- 20 A cigarette plug socket
- Pre-wired kit
Universal Panel
Features:
- Designed to mount onto rear panels
- Laser cut 2.5mm alloy panel
- ARRID expanded scale voltmeter or ammeter
- Carling push button circuit breakers
- 3 x ARRID 16 A sockets
- 20 A cigarette plug socket
- Pre-wired kit