The Blue Smart IP65s Charger is the new professional waterproof battery charger with built-in bluetooth control. The Blue Smart IP65 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Its suitable for a range of battery types including Lithium LiFePO4 Batteries

This fully Bluetooth and App* controlled charger provides the ultimate in monitoring and control, all from the palm of your hand - simply pair your smart phone or smart device to access the charger.

Featuring:

  • Water, dust and chemical resistant
  • Seven step smart charge algorithm with up to 95% efficiency
  • Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Phosphate batteries.
  • User definable "Expert Mode" to alter presets to suit battery manufacturer technical specifications.
  • Low thermal stress on electrical components for longterm reliability
  • Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation
  • Automatic power supply function
  • Severe cold performance: down to -30°C
  • Several other battery life enhancing features
  • Low power mode to charge smaller batteries
  • LiIon (LiFePO4) battery mode featuring a specific charging algorithm with Under-voltage protection
  • Setup and configure, readout of voltage and current by Bluetooth Smart
  • View indepth historical charge - cycle history for the connected battery.
  • Reverse Polarity, Short Circuit & Over Temperature protection
  • Operating Temperatures: -30 to +50 deg celcius
  • May also be used as a power supply. Power supply mode is available via the BluetoothSmart app.

Smart 7 step charging program:
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance ...and a longer life.

These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm.

Deep Discharge Recovery:
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.

Easy Battery Connection:
The charger comes with both Alligator clips and M8 eyelets - making it easy to connect to the battery. If you wish, you can leave it permanently connected.

Remote Monitoring:
The Blue Smart IP65 is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. 

Victron Connect:
VictronConnect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support or by using a VE.Direct Bluetooth Smart dongle.

History File:
View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used.

 The MODE Button:
You can operate the Blue Smart charger range without the use of Bluetooth too! The MODE button provides access to all charging programs to ensure your battery is charged & maintained properly.
For Example: the charger can be switched to low current mode (see technical specifications) by pressing the MODE button for 3 seconds.
The MODE LED will blink when in low current mode. The low current mode remains activated until the MODE button is pressed again during 3 seconds...

Model 24V - 8A
Input voltage and frequency range 100 - 250VAC | 45 - 65Hz
Output Voltage 24v
Low Current Mode
3 A
Efficiency 95%
Standby Power Consumption
<0.5 W
Minimum Battery Voltage
Starts charging from down to 0 V
Charge Voltage - Float
Normal: 27.6v High: 27.6v Li-ion: 27.0v
Charge Voltage - Absorption Normal: 28.8v High: 29.2v Li-ion: 28.4v
Charge Voltage - Storage Normal: 26.4v High: 26.4v Li-ion: 27.0v
Temperature compensation (lead-acid batteries only) 32 mV/ºC
Power supply mode Yes
Back Current Drain 0.7 Ah/month (1 mA)
Protection Reverse polarity, Output short circuit, Over temperature
Operating temp. range -40 to +60°C (full rated output up to 30°C) (cables retain flexibility at low temperature)
Humidity (non-condensing) Max 95%
Charge algorithm 7-stage adaptive
Bluetooth -4dBm, 2402 – 2480 MHz
Battery-connection Black and red cable of 1.5 meter
230V AC-connection 1.5m cable with CEE 7/16 or AS/NZS 3112 plug
Protection category IP65 (splash and dust proof)
Dimensions H x W x D (mm) 60 x 105 x 190 mm
Weight 0.9kg

 

SKU 8719076018087
Barcode # BPC240831014R
Brand Victron
Shipping Weight 1.4500kg
Shipping Width 0.280m
Shipping Height 0.070m
Shipping Length 0.210m
Shipping Cubic 0.004116000m3

Be The First To Review This Product!

Help other The 12 Volt Shop users shop smarter by writing reviews for products you have purchased.

Write a product review