The Blue Smart IP65 Power Sports Charger is the new professional battery charger & maintainer designed for use with Motorcycles, Personal Watercraft and similar smaller battery applications. 

The Blue Smart IP65s Charger comes with built-in bluetooth control and is suitable for a range of battery types including Lithium LiFePO4 Batteries

This fully Bluetooth and App* controlled charger provides the ultimate in monitoring and control, all from the palm of your hand - simply pair your smart phone or smart device to access the charger.


  • Plug & Play functionality designed for the recreational or infrequent use of Motorcycle, PWC and other smaller battery applications.
  • IP65 rated Water, dust and chemical resistant case
  • Seven step smart charge algorithm to extend battery service life
  • Automatically detects battery voltage and applies appropriate charge profile - 6V & 12V
  • 1.1A output to charge up to 30Ah capacity, or maintain up to 60Ah capacity batteries
  • Includes preset charge algorithims optimally set for all common Lead Acid and Lithium Iron Phosphate batteries.
  • User definable "Expert Mode" to alter presets to suit battery manufacturer technical specifications.
  • Low power mode to provide 500mA current to charge smaller batteries
  • Recovery of fully discharged ‘dead’ batteries & partially reverse sulfation
  • Automatic power supply function
  • Severe cold performance: down to -30°C
  • Reverse Polarity, Short Circuit & Over Temperature protection to ensure safe operation
  • May also be used as a power supply. Power supply mode is available via the VictronConnect app

Smart 7 step charging program:
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance ...and a longer life.

These chargers come standard with preset algorithms which are optimally set for all common Lead Acid and Lithium Batteries. For Battery Manufacturer specific settings, Expert mode allows changing practically all parameters and time limits used by the charge algorithm.

Deep Discharge Recovery:
Unlike other brands, the Blue Smart IP65 Charger will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals. (* battery voltage should be manually set in VictronConnect to ensure batteries are charged to the correct end voltage)

Easy Battery Connection:
The charger comes with Alligator clips, M8 eyelets (for mounting to batteries in difficult to reach spots), and a handy Cigarette lighter plug with adaptible power port plug for use with the latest European motocycles. All designed to make it easy to connect to the battery. If you wish, you can leave it permanently connected.

Remote Monitoring:
The Blue Smart IP65 is equipped with built-in Bluetooth, so the real-time status of the charger and the battery can be checked on a smartphone, tablet or laptop. All settings of the charger can be configured with the VictronConnect app. 

Victron Connect:
VictronConnect lets you program, as well as get live status and historical information in Victron products with built-in bluetooth support.

History File:
View historical data for the last 40 charge cycles. Information supplied includes Start and End voltages, time spent in each charge cycle, amp-hours charged, Completion status of each charge and charge profile used.

LED Indication:
Very simple visual representation of battery chager mode. Green light for 12V charging, Orange light for 6V charging, and Red light warning for reverse polarity connection.

Model 6V / 12V - 1.1A
Input voltage and frequency range 100 - 250VAC | 45 - 65Hz
Output Voltage 6v / 12v
Low Current Mode
0.5 A
Efficiency 82%
Standby Power Consumption
<0.5 W
Minimum Battery Voltage
Starts charging from down to 0 V
Charge Voltage - Float
Normal: 6.9v | 13.8v High: 6.9v | 13.8v Li-ion: Disabled
Charge Voltage - Absorption Normal: 7.2v | 14.4v High: 7.35v | 14.7v Li-ion: 7.1v | 14.2v
Charge Voltage - Storage Normal: 6.6v | 13.2v High: 6.6v | 13.2v Li-ion: 6.75v | 13.5v
Temperature compensation (lead-acid batteries only) 8 mV/°C | 16 mV/°C
Power supply mode Yes
Back Current Drain 0,1 Ah/month (140uA)
Protection Reverse polarity, Output short circuit, Over temperature
Operating temp. range 30 to +50°C (full rated output up to 30°C)
Humidity (non-condensing) Max 95%
Charge algorithm 7-stage adaptive
Bluetooth -4dBm, 2402 – 2480 MHz
Battery-connection Black and red cable of 1.5 meter
230V AC-connection 1.5m cable with CEE 7/16 or AS/NZS 3112 plug
Protection category IP65 (splash and dust proof)
Dimensions H x W x D (mm) 38 x 64 x 153 mm
Weight 0.4kg


SKU 8719076055150
Barcode # BPC120134014R
Brand Victron
Shipping Weight 0.8500kg
Shipping Width 0.250m
Shipping Height 0.060m
Shipping Length 0.190m
Shipping Cubic 0.002850000m3

Be The First To Review This Product!

Help other The 12 Volt Shop users shop smarter by writing reviews for products you have purchased.

Write a product review