Victron BlueSmart IP22 Battery Charger 12V-15A(3) 230V - BPC121544012
Victron BlueSmart IP22 Battery Charger 12V-15A(3) 230V
The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth control. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Its suitable for a range of battery types including Lithium LiFePO4 Batteries.
The Bluesmart IP22 3 Output Chargers will charge upto 3 separate battery banks (must be the same chemistry)
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.
Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.
Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Also charges Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.
NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.
Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.
Eleven LEDs for status indication
Charge algorithm: TEST / BULK / ABSORPTION / RECONDITION / FLOAT / STORAGE / READY.
MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.
|Model||12V - 15A (3 Output)|
|Input voltage and frequency range||100 - 250VAC | 45 - 65Hz|
Low Current Mode
Standby Power Consumption
Minimum Battery Voltage
|Starts charging from down to 0 V|
Charge Voltage - Float
|Normal: 13.8v High: 13.8v Li-ion: 13.5v|
|Charge Voltage - Absorption||Normal: 14.4v High: 14.7v Li-ion: 14.2v|
|Charge Voltage - Storage||Normal: 13.2v High: 13.2v Li-ion: 13.5v|
|Temperature compensation (lead-acid batteries only)||16 mV/ºC|
|Power supply mode||Yes|
|Back Current Drain||0.7 Ah/month (1 mA)|
|Protection||Reverse polarity, Output short circuit, Over temperature|
|Operating temp. range||-40 to +60°C (full rated output up to 30°C) (cables retain flexibility at low temperature)|
|Humidity (non-condensing)||Max 95%|
|Charge algorithm||6-stage adaptive|
|Bluetooth||-4dBm, 2402 – 2480 MHz|
|Battery-connection||Screw terminals 16 mm² / AWG6|
|230V AC-connection||1.5m cable with CEE 7/16 or AS/NZS 3112 plug|
|Protection category||IP65 (splash and dust proof)|
|Dimensions H x W x D (mm)||235 x 108 x 65 mm|
Others Also Bought