The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth control. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans. Its suitable for a range of battery types including Lithium LiFePO4 Batteries

Bluetooth Smart
The Blue Smart IP22 Charger is the wireless solution to monitor voltage and current, to change settings and to update the charger when new features become available.

High efficiency
With up to 94% efficiency, these chargers generate up to four times less heat when compared to the industry standard. And once the battery is fully charged, power consumption reduces to 0,5 Watt, some five to ten times better than the industry standard.

Adaptive 6-stage charge algorithm: test - bulk – absorption - recondition – float – storage
The Blue Smart Charger features a microprocessor controlled ‘adaptive’ battery management. The adaptive feature will automatically optimize the charging process relative to the way the battery is being used.

Storage Mode: less maintenance and aging when the battery is not in use
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalize’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.

Also charges Li-ion (LiFePO₄) batteries
LiFePO₄ batteries are charged with a simple bulk – absorption – float algorithm.

NIGHT and LOW setting
When in NIGHT or LOW mode, the output current is reduced to max. 50% of the nominal output and the charger will be totally noiseless. The NIGHT mode automatically ends after 8 hours. The LOW mode can be ended manually.

Protected against overheating
Output current will reduce as temperature increases up to 50°C, but the Blue Smart Charger will not fail.

Eleven LEDs for status indication
MODE button to set: NORMAL (14,4V) / HIGH (14,7V) / RECONDITION / LI-ION.

Model 12V - 20A (1 Output)
Input voltage and frequency range 100 - 250VAC | 45 - 65Hz
Output Voltage 12v
Low Current Mode
10 A
Efficiency 93%
Standby Power Consumption
<0.5 W
Minimum Battery Voltage
Starts charging from down to 0 V
Charge Voltage - Float
Normal: 13.8v High: 13.8v Li-ion: 13.5v
Charge Voltage - Absorption Normal: 14.4v High: 14.7v Li-ion: 14.2v
Charge Voltage - Storage Normal: 13.2v High: 13.2v Li-ion: 13.5v
Temperature compensation (lead-acid batteries only) 16 mV/ºC
Power supply mode Yes
Back Current Drain 0.7 Ah/month (1 mA)
Protection Reverse polarity, Output short circuit, Over temperature
Operating temp. range -40 to +60°C (full rated output up to 30°C) (cables retain flexibility at low temperature)
Humidity (non-condensing) Max 95%
Charge algorithm 6-stage adaptive
Bluetooth -4dBm, 2402 – 2480 MHz
Battery-connection Screw terminals 16 mm² / AWG6
230V AC-connection 1.5m cable with CEE 7/16 or AS/NZS 3112 plug
Protection category IP65 (splash and dust proof)
Dimensions H x W x D (mm) 235 x 108 x 65 mm
Weight 1.3kg


SKU 8719076055310
Barcode # BPC122042012
Brand Victron
Shipping Weight 1.6000kg
Shipping Width 0.270m
Shipping Height 0.080m
Shipping Length 0.160m
Shipping Cubic 0.003456000m3

Be The First To Review This Product!

Help other The 12 Volt Shop users shop smarter by writing reviews for products you have purchased.

Write a product review