12V 3000VA 7.78kWh Power System | Power & Storage
12V 3000VA 7.78kWh Mobile Power Kit | Electronic Power (Inverter/Charger, DC-DC, MPPT, BMV-712 & Dua
12V 3000VA 7.78kWh Mobile Power Kit | Electronic Power (Inverter/Charger, DC-DC, MPPT, BMV-712 & Dual Lithium)
Combine premium conversion performance with massive energy storage using the 12V 3000VA Electronic Power Mobile Kit. Engineered for caravan builders and vehicle owners who have custom solar array layouts or pre-wired fuse boards, this system merges Victron Energy conversion electronics with dual high-capacity CAN-bus lithium batteries for ultimate mobile energy independence.
Key Features & Highlights
- Uncompromising Victron MultiPlus-II Performance: Run heavy 230V household appliances smoothly with the MultiPlus-II 3000VA inverter/charger, featuring an integrated 120A charger and seamless 32A transfer switching.
- Massive 600Ah / 7,782.4Wh Dual Lithium Energy Storage: Includes two 12VS (The 12 Volt Shop) 304-CAN lithium batteries delivering 600Ah (7,782.4Wh usable energy) with advanced CAN-bus communication, low weight, and deep discharge resilience.
- High-Current Engine Charging: The Victron Orion XS 12-12/50 DC-DC charger supplies up to 50A of tailored charge current direct from your vehicle alternator while driving.
- Smart Solar Regulation & Monitoring: Pair your custom solar array with the Victron SmartSolar MPPT 100/50 regulator and monitor live system status via the Bluetooth-enabled BMV-712 Smart Battery Monitor.
- Terminal-Level Battery Protection: Equipped with Blue Sea MRBF terminal fuse blocks and heavy-duty e-Series isolation switches for dedicated protection right at the battery posts.
Complete Bill of Materials
Core Conversion & Control Equipment
- 1 x Victron MultiPlus-II 12/3000/120-32 Inverter/Charger
- 1 x Victron Orion XS 12-12/50 DC-DC Charger
- 1 x Victron SmartSolar MPPT 100/50 Solar Regulator
- 1 x Victron BMV-712 Smart Battery Monitor
Storage (Included)
- 2 x 12VS 304-CAN Lithium Batteries (600Ah Total / 7,782.4Wh)
Main Battery-Terminal Protection & Isolation
- 2 x Blue Sea 5191 MRBF Terminal Fuse Blocks (Battery Parallel Protection)
- 2 x Blue Sea 5188 225A MRBF Fuses (Battery Parallel Protection)
- 2 x Blue Sea 6006 e-Series Battery Switches (Heavy-Duty Isolators)
Technical Note: Recommended to run a minimum of 0 B&S / 0 AWG cable from batteries to the main power busbar or distribution board.
Technical Note (Minimum Cable Sizing): Inverter to Main Battery/Busbar requires a minimum of 3/0 B&S / 3/0 AWG cable (protected via 300A fuse). Orion XS DC-DC charger requires 6 B&S (16mm²) for 0–5m runs or 4 B&S (25mm²) for 5–10m runs. MPPT 100/50 terminals accept up to 16mm² / 6 B&S cable on all terminals—run standard 4–6mm² solar cable from the PV array to the MPPT input, and 16mm² (6 B&S) battery cable from the MPPT output to the battery/busbar for the 50A DC charge feed. Installer must calculate and supply appropriately sized cabling for custom load distribution networks.
Note: Installer must supply own solar panels, mounting brackets, roof entry gland/leads, busbars, covers, auxiliary fuse block, and MEGA branch fusing.
SKU: KIT-12V-3000VA-EPOWER
| SKU | KIT-12V-3000VA-EPOWER |
| Shipping Weight | 105.0000kg |
| Shipping Width | 0.340m |
| Shipping Height | 0.370m |
| Shipping Length | 0.635m |
| Shipping Cubic | 0.079883000m3 |
Be The First To Review This Product!
Help other The 12 Volt Shop users shop smarter by writing reviews for products you have purchased.