12V 3000VA Mobile Power Kit | Electronics & Solar (3 x Panels, Inverter/Charger, DC-DC, MPPT, Monitoring, Fusing & Dist)

Power up your caravan or canopy system from roof to distribution board with the 12V 3000VA Electronics & Solar Mobile Power Kit. Perfect for customers who already own lithium batteries or require a custom storage setup, this kit supplies a high-output Exotronic solar array, Victron core electronics, and a complete marine-grade distribution hub.

Key Features & Highlights

• Uncompromising Victron MultiPlus-II Performance: At the center of your AC grid is the Victron MultiPlus-II 3000VA inverter/charger with a 120A charger and 32A transfer switch.
• Next-Generation Exotronic N-Type TOPCon Solar Array: Harness maximum sun with three Exotronic Fusion Series 220W 48V panels featuring N-Type TOPCon 99-cell technology for superior performance in extreme heat and low light.
• Ultra-Efficient Vehicle & Solar Charging: Combines the Orion XS 50A DC-DC charger and SmartSolar MPPT 100/50 regulator for rapid charging on the move or at camp.
• Modular MEGA-Flex & Marine Distribution Hub: Includes Blue Sea 600A busbars, an auxiliary 12-way ST Blade fuse block, and interlinked Littelfuse MEGA distribution for complete DC branch protection.
• IP68 Solar Roof Entry System: Features a dual compression deck gland paired with a 10m pre-assembled Victron 6mm² solar lead for leak-proof, vibration-resistant roof wiring.

Complete Bill of Materials

Core Generation & Mounting

• 3 x Exotronic Fusion Series 220W 48V Solar Panels (N-Type TOPCon, 99-Cell High-Voltage Architecture)
• 3 x Aluminium Solar Panel Mounting Bracket Kits (Z-Brackets or Corner Mounts)
• 1 x Victron MultiPlus-II 12/3000/120-32 Inverter/Charger
• 1 x Victron Orion XS 12-12/50 DC-DC Charger
• 1 x Victron SmartSolar MPPT 100/50 Solar Regulator
• 1 x Victron BMV-712 Smart Battery Monitor

Main Battery-Terminal Isolation

• 1 x Blue Sea 6006 e-Series Battery Switches (Heavy-Duty Isolators)

Busbars & Distribution Architecture

• 2 x Blue Sea 2104 600A Busbars (3/8" studs)
• 2 x Blue Sea 2718 MaxiBus Insulating Covers (for busbars)
• 1 x Blue Sea 5026 ST Blade 12-Way Fuse Block with Negative Bus (Auxiliary House Loads)

Vehicle-Side DC-DC Input Fusing (Engine Bay / Standalone)

• 1 x Eaton Bussmann HBAT1-101 58V Modular Fuse Block
• 1 x Littelfuse 60A MIDI/AMI Fuse (Vehicle DC-DC Input Protection)

Main Hub Distribution & Branch Fusing (MEGA Architecture)

• 1 x Littelfuse 02981028HXFC MEGA/AMG Fuse Block (Dedicated Inverter Protection)
• 1 x PEC 300A MEGA/AMG Fuse (Inverter Branch Protection)
• 3 x Littelfuse 02981028HXFC MEGA/AMG Fuse Blocks (Interlinked via Busbar for DC-DC Output, MPPT Output, & Aux Feed)
• 1 x Littelfuse MEGA Busbar Link Component
• 1 x PEC 60A MEGA/AMG Fuse (DC-DC Output Branch)
• 1 x PEC 60A MEGA/AMG Fuse (MPPT Output Branch)
• 1 x PEC 60A MEGA/AMG Fuse (Auxiliary Fuse Block Feed)

Technical Note (Minimum Cable Sizing): Main Busbar to Inverter requires minimum 3/0 B&S / 3/0 AWG cable (via 300A MEGA fuse). Main Busbar to Secondary Fuse Bank requires minimum 2 B&S / 2 AWG cable (feeding the interlinked 60A block assembly). Orion XS DC-DC charger requires 6 B&S (16mm²) for 0–5m runs or 4 B&S (25mm²) for 5–10m runs. MPPT 100/50 terminals accept up to 16mm² / 6 B&S cable on all terminals—run standard 4–6mm² solar cable from PV array to MPPT input, and 16mm² (6 B&S) battery cable from MPPT output to the main distribution branch for the 50A DC charge feed.

Solar Fusing, Wiring & Roof Entry

• 1 x Dual-Cable IP68 Compression Solar Roof Entry Gland
• 1 x Victron SCA001000100 10m 6mm² Solar Cable with Pre-Assembled MC4 Connectors (Cut-to-Length Roof Entry Run)
• 1 x 3-way MC4 Branch Adaptor Set (Secured externally on the roof)
• 3 x 10A MC4 Inline Fuses (Parallel Array Protection)
• 1 x 16A NOARK DC Circuit Breaker & Enclosure Box

Technical Note: Cut the 10m Victron solar cable lead in half to provide two 5m runs. Pass bare ends through compression gland to internal DC breaker/MPPT while connecting pre-moulded MC4 plugs externally on roof. Secure branch adaptor externally to eliminate mechanical strain on deck gland.

SKU: KIT-12V-3000VA-3P-ESOLAR