12V 3000VA Mobile Power Kit | Electronics & Solar (4 x Panels, Inverter/Charger, DC-DC, MPPT, Monito

12V 3000VA Mobile Power Kit | Electronics & Solar (4 x Panels, Inverter/Charger, DC-DC, MPPT, Monitoring, Fusing & Dist)

Maximize roof-space harvesting and power up your caravan or canopy setup with the 12V 3000VA Electronics & Solar Mobile Power Kit (4-Panel Array). Engineered for high-demand mobile applications, this system pairs an expanded 880W N-Type TOPCon solar array with Victron core conversion electronics and a complete marine-grade DC distribution hub, allowing you to integrate your choice of lithium battery storage.

Key Features & Highlights

Uncompromising Victron MultiPlus-II Performance: Run heavy 230V household appliances effortlessly with the Victron MultiPlus-II 3000VA inverter/charger, featuring an integrated 120A battery charger and 32A transfer switch.
Expanded 880W Exotronic N-Type TOPCon Solar Array: Four Exotronic Fusion Series 220W 48V panels deliver maximum daily solar yield using 99-cell high-voltage N-Type TOPCon technology for exceptional low-light sensitivity and heat resilience in harsh Australian conditions.
High-Yield Vehicle & Solar Charging: Features the Victron Orion XS 50A DC-DC charger for smart alternator recovery on the move, alongside the Victron SmartSolar MPPT 100/50 regulator.
Modular MEGA-Flex & Marine Distribution Hub: Includes Blue Sea 600A busbars, an auxiliary 12-way ST Blade fuse block, and interlinked Littelfuse MEGA branch fusing for clean, low-resistance DC distribution.
IP68 Dual-Entry Solar Roof Access: Supplied with an IP68 dual compression roof gland, a 10m pre-assembled Victron 6mm² solar lead, and 4-way parallel MC4 branch adaptors for leak-proof roof wiring.

Complete Bill of Materials

Core Generation & Mounting

4 x Exotronic Fusion Series 220W 48V Solar Panels (N-Type TOPCon, 99-Cell High-Voltage Architecture)
4 x Aluminium Solar Panel Mounting Bracket Kits (Z-Brackets or Corner Mounts)
1 x Victron MultiPlus-II 12/3000/120-32 Inverter/Charger
1 x Victron Orion XS 12-12/50 DC-DC Charger
1 x Victron SmartSolar MPPT 100/50 Solar Regulator
1 x Victron BMV-712 Smart Battery Monitor

Main Battery-Terminal Isolation

1 x Blue Sea 6006 e-Series Battery Switches (Heavy-Duty Isolators)

Busbars & Distribution Architecture

2 x Blue Sea 2104 600A Busbars (3/8" studs)
2 x Blue Sea 2718 MaxiBus Insulating Covers (for busbars)
1 x Blue Sea 5026 ST Blade 12-Way Fuse Block with Negative Bus (Auxiliary House Loads)

Vehicle-Side DC-DC Input Fusing (Engine Bay / Standalone)

1 x Eaton Bussmann HBAT1-101 58V Modular Fuse Block
1 x Littelfuse 60A MIDI/AMI Fuse (Vehicle DC-DC Input Protection)

Main Hub Distribution & Branch Fusing (MEGA Architecture)

1 x Littelfuse 02981028HXFC MEGA/AMG Fuse Block (Dedicated Inverter Protection)
1 x PEC 300A MEGA/AMG Fuse (Inverter Branch Protection)
3 x Littelfuse 02981028HXFC MEGA/AMG Fuse Blocks (Interlinked via Busbar for DC-DC Output, MPPT Output, & Aux Feed)
1 x Littelfuse MEGA Busbar Link Component
1 x PEC 60A MEGA/AMG Fuse (DC-DC Output Branch)
1 x PEC 60A MEGA/AMG Fuse (MPPT Output Branch)
1 x PEC 60A MEGA/AMG Fuse (Auxiliary Fuse Block Feed)

Technical Note (Minimum Cable Sizing): Main Busbar to Inverter requires minimum 3/0 B&S / 3/0 AWG cable (via 300A MEGA fuse). Main Busbar to Secondary Fuse Bank requires minimum 2 B&S / 2 AWG cable (feeding the interlinked 60A block assembly). Orion XS DC-DC charger requires 6 B&S (16mm²) for 0–5m runs or 4 B&S (25mm²) for 5–10m runs. MPPT 100/50 terminals accept up to 16mm² / 6 B&S cable on all terminals—run standard 4–6mm² solar cable from PV array to MPPT input, and 16mm² (6 B&S) battery cable from MPPT output to the main distribution branch for the 50A DC charge feed.

Solar Fusing, Wiring & Roof Entry

1 x Dual-Cable IP68 Compression Solar Roof Entry Gland
1 x Victron SCA001000100 10m 6mm² Solar Cable with Pre-Assembled MC4 Connectors (Cut-to-Length Roof Entry Run)
1 x 4-way MC4 Branch Adaptor Set (Secured externally on the roof)
4 x 10A MC4 Inline Fuses (Parallel Array Protection)
1 x 20A NOARK DC Circuit Breaker & Enclosure Box

Technical Note (PV Array Configuration): Due to the 69.3V Voc rating of Exotronic 220W 48V panels, all four panels must be wired in 1S parallel (1S4P) into the SmartSolar MPPT 100/50. Cut the 10m Victron solar cable lead in half to provide two 5m runs. Pass bare ends through compression gland to internal DC breaker/MPPT while connecting pre-moulded MC4 plugs externally on roof. Secure branch adaptors externally to eliminate mechanical strain on deck gland.

SKU: KIT-12V-3000VA-4P-ESOLAR

SKU	KIT-12V-3000VA-4P-ESOLAR
Shipping Weight	150.0000kg
Shipping Width	0.700m
Shipping Height	0.540m
Shipping Length	1.500m
Shipping Cubic	0.567000000m3

Be The First To Review This Product!

Help other The 12 Volt Shop users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Multi RS Solar 48/6000/100-450/100

$2,401.00

In Stock Victron - ETA 14 Days

RRP $2,889.70

12V 3000VA 7.78kWh Mobile Power Kit | Complete (3 x Panels, Inverter/Charger, DC-DC, MPPT, Batteries, Monitoring, Fusing & Dist)

12V 3000VA 7.78kWh 3-Panel System | Complete Kit

$8,025.78

Check Availability

Bundle Deal
RRP $11,329.67

12V 3000VA Mobile Power Kit | Core Electronics (Inverter/Charger, DC-DC, MPPT & Monitoring)

12V 3000VA Power System | Core Electronics

$2,688.02

Check Availability

Bundle Deal
RRP $3,180.10

More From This Category

12V 3000VA 7.78kWh Mobile Power Kit | Complete (4 x Panels, Inverter/Charger, DC-DC, MPPT, Batteries, Monitoring, Fusing & Dist)

12V 3000VA 7.78kWh 4-Panel System | Complete Kit

$8,323.76

Check Availability

Bundle Deal

12V 3000VA Power System | Core Electronics

$2,688.02

Check Availability

Bundle Deal
RRP $3,180.10

12V 3000VA Mobile Power Kit | Electronics & Solar (3 x Panels, Inverter/Charger, DC-DC, MPPT, Monitoring, Fusing & Dist)

12V 3000VA 3-Panel Power System | Elec & Solar

$4,516.83

Check Availability

Bundle Deal
RRP $5,178.63

12V 3000VA 7.78kWh 3-Panel System | Complete Kit

$8,025.78

Check Availability

Bundle Deal
RRP $11,329.67

12V 3000VA 7.78kWh Mobile Power Kit | Electronic Power (Inverter/Charger, DC-DC, MPPT, BMV-712 & Dual Lithium)

12V 3000VA 7.78kWh Power System | Power & Storage

$6,251.96

Check Availability

Bundle Deal
RRP $9,304.06

Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern The 12 Volt Shop’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.

The term ‘The 12 Volt Shop’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 4 / 12 Kewdale Road, WELSHPOOL, WA, 6106, AU. Our ABN is 51 106 172 785. The term ‘you’ refers to the user or viewer of our website.

The use of this website is subject to the following terms of use:

The content of the pages of this website is for your general information and use only. It is subject to change without notice.
Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.
Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.
This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.
All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.
Unauthorised use of this website may give rise to a claim for damages and/or be a criminal offence.
From time to time, this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).
Your use of this website and any dispute arising out of such use of the website is subject to the laws of Australia.

Shipping & Unattended Delivery Policy (Authority to Leave)

1. Standard Delivery Service: We utilize premier commercial courier networks (including TNT and FedEx) to fulfill shipments. To ensure efficient and contactless service, residential deliveries are dispatched under a standard "Authority to Leave" (ATL) protocol.

2. Transfer of Risk: By completing your purchase, you explicitly acknowledge and agree that if the delivery address is unattended at the time of arrival, the courier is authorized to leave the consignment in a designated safe place at the premises without requiring a signature.

3. Proof of Delivery: Photographic evidence or GPS synchronization data captured by the courier network confirming a successful drop-off shall constitute definitive "Proof of Delivery" (POD).

4. Liability Exclusions: Once the courier has logged the consignment as successfully delivered with accompanying POD, the contract of carriage is legally fulfilled. We accept no liability or financial responsibility for subsequent loss, ambient damage, or third-party theft of the items from your premises.

Refunds and Returns

Should you wish to make a return, refund or exchange, bring or post the product/s in store with your proof of purchase and if necessary a note or relevant information to assist our staff in best serving you. To qualify for the return, the product must be returned to us within 30 days of the dispatch date and in its original undamaged packaging, including all accessories. To ensure the process is as easy as possible, please provide the following:

Present your proof of purchase (Receipt, Bank Statement, Photograph of your receipt or online tax invoice). If you cannot find this information please contact us.
The product/s should be in original condition and packaging (including manuals and accessories).
Return postage is at customers expense and will not be refunded.

Head to the Contact Us section of our website and send us an email regarding your return/exchange query, then wait for our instructions before returning any goods.

Exchange of goods policy

If you wish to return a product and exchange it for another item, we will offer a store credit (available to use 48 hours after the return has been received) this allows us time to confirm the product is returned in an “as new” saleable condition and to process the store credit onto your account. The store credit will be for the full amount minus the 3% payment processing fee through Stripe.

Refunds policy

Items returned due to change of mind will incur a 10% restocking if returned in the original packaging, and a 30% restocking fee applies for items returned without the original packaging or accessories. This amount is on top of the 3% payment processing fee mentioned above.

Important information applicable to our Exchange and Refund of goods policies

We do not accept returns or exchanges of goods after 30 days from the date goods are received.
Our Exchange and refund policies are subject to the goods being returned at your expense in an as-shipped, saleable condition including, original packaging. The packaging must be in a re-saleable condition.
The refund will be calculated as the purchase price of the product only, less shipping and any re-stocking fee and paid in the same way as the original payment.
Some products, including anything custom-made, special order in items and products bought in large quantities may not be returnable unless a warranty or guarantee is breached. Our returns policy is in addition to your rights under the Australian Consumer Law or Consumer Guarantees Act (NZ).
We do not refund the original outgoing or the return costs of freight on any returned or exchanged item.

The 12 Volt Shop Pty Ltd reserves the right not to accept return of goods when they are:

Specifically manufactured at the customers request (i.e. custom made).
Specially ordered in on the customers behalf (i.e. Indent products).
Large quantity orders that may have already been covered by 12VS with replacement orders with our principles. (i.e. Non-Cancellable order types).
Goods that have been in the customer’s possession for a reasonable time & are requested by the customer to be returned to us after such time has elapsed that the goods are out of warranty, near or past their expiry date. Goods that have been damaged or had packaging damaged or removed. Warranty is conditional in accordance with manufacturer’s parameters & guidelines.

12V 3000VA 4-Panel Power System | Elec & Solar